User`s manual

CBM-202PC-04 User’s Manual
67 CITIZEN
ESC t n
[Function] Selecting the Character Code Table
[Code] <1B>H<74>H<n>
[Range] {0  n  1} Data is described in Hex code.
[Outline] Selecting Page n on the character code table:
The character code table is selected depending on the value of n.
"n" means the followings.
n (Hex) Condition
0 Page 0(IBM Character #2)
1 Page 1(Domestic Character)
[Default] The initial value of n is subject to the character set for the country
specified by the function selecting terminal (Gate Array Pin 39,42,43).
• When Japan is selected: Domestic characters
• When non-Japan is selected: IBM characters #2
[See Also] Character Code Table
[Sample Program]
LPRINT CHR$ (&H1B) + "t" + CHR$ (0) ;
LPRINT " n=0" ;
FOR C=&HB1 TO &HB5
LPRINT CHR$ (C) ;
NEXT C
LPRINT CHR$ (&HA) ;
LPRINT CHR$ (&H1B) + "t" + CHR$ (1) ;
LPRINT " n=1" ;
FOR C=&HB1 TO &HB5
LPRINT CHR$ (C) ;
NEXT C
LPRINT CHR$ (&HA) ;
[Print Results]