User`s manual

CBM-202PC-04 User’s Manual
47 CITIZEN
ESC ! n
[Function] Collective Specifying Printing Mode
[Code] <1B>H<21>H<n>
[Range] {0  n  FF} Data is described in Hex code.
[Outline] Printing mode is assigned. Each n bit indicates the following:
Value
Bit Function 0 1
0 Character Font Font A Font B
1 Undefined
2 Undefined
3 High-lighting Canceled Specified
4 Double height Canceled Specified
5 Double width Canceled Specified
6 Undefined
7 Underline Canceled Specified
[Caution] • With double height and double width being specified simultaneously,
double wide and double high characters are consisted.
• An underline is attached to the full character width, which, however, is
not attached to the part having been skipped by the horizontal tab.
Neither is it attached to 90º-right-turned characters.
• The underline width is as having been specified by <ESC - >. (The
default setting is 1 dot width. )
• Specification with this command is invalid to Kanji, except specification
and cancellation of highlighting
• In case that double height character and normal character exist in same
one line, the layout of underline is consistent one.
[Default] n = 0
[See Also] ESC E, ESC –