User`s manual

CBM-202PC-04 User’s Manual
35 CITIZEN
5.3 Auto Loading
Auto loading is a function to facilitate replacement of the printing paper.
It is enabled by setting the function selection terminal(Gate Array Pin 38) to "LOW."
Functioning:
1) Make the PE sensor detect PE once.
2) Insert the printing paper into the printing paper insertion slot until the PE sensor
detects the paper again. When this is done, the paper should be inserted at a right
angle to the insertion slot; insert it until it comes to the end.
3) When this is done, if the head-up lever is shifted down, auto loading will be performed.
If the head-up lever is shifted up, shift it down. Then, auto loading will be performed.
4) See Table 5.1 for the drive speed.