Setup guide

CITIZEN OPOS DRIVER 1.8 Setup Guide
5
1. Operating Environment
Operating System
This driver supports the following Windows operating systems
･ Windows 2000
･ Windows XP
Object Models
Object models of this product and the corresponding interface are as shown below.
For details of each model, refer to the Printer User’s Guide.
Series of
Model
Object Model Interface Printer Functions
CBM-1000TypeII Serial, Parallel, USB Standard
CBM-1000II
CBM-1000TypeII- L Serial, Parallel, USB Blackmark paper and label paper are
supported.
CT-S300 Serial, Parallel, USB Standard (Paper with blackmark on
front side is supported.)
CT-S300
CT-S300-M1/M2 Serial, Parallel, USB Paper with blackmark on back side is
supported.
CT-S310 Serial, Parallel, USB Standard (Paper with blackmark on
front side is supported.)
CT-S310
CT-S310-M1/M2 Serial, Parallel, USB Paper with blackmark on back side is
supported.
CT-S2000 Serial, Parallel, USB Standard
CT-S2000-M Serial, Parallel, USB Blackmark paper is supported
CT-S2000
CT-S2000-L Serial, Parallel, USB Label paper is supported.
CT-S4000 Serial, Parallel, USB Standard (Paper with blackmark on
front side is supported.)
CT-S4000-M Serial, Parallel, USB Paper with blackmark on back side is
supported.
CT-S4000
CT-S4000-L Serial, Parallel, USB Label paper is supported.
CD-S500 Serial, Parallel, USB Standard type (Without cutting
feature)
CD-S501 Serial, Parallel, USB With cutting feature
CD-S500
CD-S503 Serial, Parallel, USB Rewinder equipped (With cutting
feature)
USB Interface Connection
Before using this product with USB interface connection, it is necessary to install Windows driver.
* This product is designed to operate on the USB interface port (Virtual printer port for USB) specified
on Windows driver.