Setup guide

CITIZEN OPOS DRIVER 1.8 Setup Guide
31
6.5 CD-S500 Series
DIP Switch Setting
DSW No. Function Setting Description
8
INIT
(when serial interface is used)
OFF Disabled
Memory Switch Setting
MSW No. Function Setting Description
SoftCtrl-1 Command Type EPSON -
SoftCtrl-5
Paper End
(when USB and parallel IF are
used)
DIS
At paper end
Only Busy signal is
output.
SoftCtrl-6
Paper Near-End
(when USB and parallel IF are
used)
DIS
At paper near-end
Signal not output
SoftCtrl-8
Print Direct
(Specifies print direction)
BI-DIR
Print from right or
left end nearer from
the print stop
position.
SoftCtrl-9 Auto LF OFF -
SoftCtrl-11 Buffer Size 4Kbyte -
SoftCtrl-12 Init Signal ENB
Initialize signal
enabled
Mechanical-2 Auto-Cutter FREE -
Mechanical-3 Color Ribbon ON Command switching