Setup guide

CITIZEN OPOS DRIVER 1.8 Setup Guide

6. Printer Setting

Using this product assumes that the DIP switch and memory switch of the printer are set as shown below.

For the details of the method of operating each switch and the content of setting, refer to User’s Guide of

each model.

6.1 CBM-1000II Series

DIP Switch Setting

DSW No. Function Setting Description

1-1 Auto cutter ON With auto cutter

1-5 CR mode OFF Ignored

1-6 Input buffer OFF 4KB

2-1 ON

2-2 OFF

2-3 OFF

2-4

Select character code table.

OFF

Katakana

2-5 JIS/Shift-JIS ON Shift-JIS

2-6 Condition for BUSY state ON Receiving buffer full

3-7

DSR

(when serial interface is used)

OFF DSR

3-8

INIT

(when serial interface is used)

OFF Disabled

* This model has no software switch function.