Setup guide

CITIZEN OPOS DRIVER 1.8 Setup Guide

6) Then the “Add new cash drawer” wizard starts.

Specify the number of cash drawers connected to the printer and click [Next].

If “One Cash Drawer” or “Two Cash Drawers” is specified, the “First drawer settings” window is

displayed.

Signal Length

Specifies the time width of the pulse signal output to the solenoid of the cash drawer.

Setting range: 1 to 10 msec

Pin3 Connected

Check this when the pin 3 (drawer switch input) of the drawer kick connector is connected.

Pin3 Status of Drawer Opened

Specify the drawer switch input signal level with cash drawer open.

Setting value: High/Low