Setup guide

CITIZEN OPOS DRIVER 1.8 Setup Guide

is designated by the Windows Driver at OPOS Driver side.

2) In the case when USB Mode is Virtual COM

Perform installation of Virtual COM Driver. Designate serial interface port designated on the Virtual COM

driver at OPOS Driver side.

Parallel Interface Connection

If the terminal and the printer are connected together through parallel interface, the installation wizard

requesting you to install printer driver each time you start the terminal may start. To prevent this

installation wizard from starting install Windows driver.

Installing Windows Driver

Windows drivers corresponding to individual models are as shown below. For the method of Windows

driver installation, refer to “Windows Driver Guide” supplied with Windows driver.

Object Model Windows Driver Name Printer Function

CBM-1000TypeII CITIZEN CBM1000 Type II Standard

CBM-1000TypeII- L CITIZEN CBM1000 Type II Label Blackmark paper and label paper are

supported.

CT-S281 CITIZEN CT-S281 Standard

CT-S300 CITIZEN CT-S300 Standard (Paper with blackmark on front

side is supported.)

CT-S300-M1/M2 CITIZEN CT-S300 Black Mark Paper with blackmark on back side is

supported.

CT-S310 CITIZEN CT-S300 Standard (Paper with blackmark on front

side is supported.)

CT-S310-M1/M2 CITIZEN CT-S310 Black Mark Paper with blackmark on back side is

supported.

CT-S2000 CITIZEN CT-S2000 Standard

CT-S2000-M CITIZEN CT-S2000 Blackmark paper is supported.

CT-S2000-L CITIZEN CT-S2000 Label paper is supported.

CT-S601/651/801/851 CITIZEN CT-S601/651/801/851 Standard

CT-S601/651/801/851-M CITIZEN CT-S601/651/801/851 Black

Mark

Blackmark paper is supported.

CT-S801-L CITIZEN CT-S801 Label Label paper is supported.

CT-S4000 CITIZEN CT-S4000 Standard (Paper with blackmark on front

side is supported.)

CT-S4000-M CITIZEN CT-S4000 Paper with blackmark on back side is

supported.

CT-S4000-L CITIZEN CT-S4000 Label Label paper is supported.

CD-S500 CITIZEN CD-S500 Standard type (Without cutting feature)

CD-S501 CITIZEN CD-S501/503 With cutting feature

CD-S503 CITIZEN CD-S500/503 Rewinder equipped (With cutting feature)

Windows driver includes two types: a driver with status function (language monitor) that allows checking of

printer status and a driver without status function. When using this driver, be sure to install the

Windows driver without status function.

* Use of this driver together with Windows driver having status function is not permitted.