Setup guide

CITIZEN OPOS DRIVER 1.8 Setup Guide
33
6.3 CT-S300 Series
DIP Switch Setting
DSW No. Function Setting Description
8
INIT
(when serial interface is used)
OFF Disabled
Memory Switch Setting
MSW
No.
Function Setting Description
1-1 Power ON notify setting OFF Enabled
1-2 Input buffer OFF 4KB
1-3 Busy condition ON Buffer full
1-4 Receiving error character OFF Character?
1-5 CR mode OFF Disabled
1-7
DSR signal
(when serial interface is used)
OFF DSR
1-8
INIT signal
(when serial interface is used)
OFF -
2-2 Auto cutter operation ON Enabled
3-1 Auto cutter restore OFF L/F enabled
3-3
Parallel 31 Pin
(when USB and parallel IF are
used)
OFF Reset
3-7 CBM1000-compatible mode OFF Non-compatible
3-8 Cover opened while printing OFF Auto restore
4-8 Full cut command OFF Full cut