Setup guide

CITIZEN OPOS DRIVER 1.8 Setup Guide

If “One Cash Drawer” or “Two Cash Drawers” is specified, the “First drawer settings” window is

displayed.

Signal Length

Specify the time width of the pulse signal output to the solenoid of the cash drawer.

Setting range: 1 to 10msec

Pin3 Connected

Check this when the pin 3 (drawer switch input) of the drawer kick connector is connected.

Pin3 Status of Drawer Opened

Specify the drawer switch input signal level with cash drawer open.

Setting value: High/Low

After the above setting, click [Next].

* When “Two Cash Drawers” is specified, clicking [Next] causes the “Second drawer settings” window is

displayed.

Set the second cash drawer as in the same manner as the above and click [Next].

7) “Finish the printer setting” window is displayed.

Click [Finish]. Here, this tool performs registration processing for system registry.

* It takes some time till registration of system registry is completed.