Setup guide

CITIZEN OPOS DRIVER 1.8 Setup Guide
2
Revision Record
Date Revision Description
07/12/21 Rev1.00 New issue
08/10/17 Rev1.01
Installer was changed. (Also related issues were modified.)
CT-S281 was newly supported.
Unsupported column settings for CT-S200 were deleted.
CT-S310 series were separated from CT-S300 series, and some settings
for CT-S310 were added.
08/12/12 Rev1.02
Update as follows accompanied by the Ethernet interface
correspondence;
・Add Ethernet to Interface on Object Model Table (Page 5)
・Change main screen drawing of setting tool (Page 11)
・Add NET designated time of setting tool (Page 16)
・Add operation method in the network setting item on the main screen
for setting tool (Page 19)
09/02/16 Rev1.03
Update as follows accompanied by memory switch change for printer
setting;
・Delete full digit printing (Pages 30, 31, 32, 33 and 34)
Add [Job Receiving Time Out] for print server setting (Page 17)
Change network setting method (Page 19)
09/05/07 Rev1.04
Correct as follows due to description errors;
・Correct CT-S281 I/F (Page 5)
・Delete line from CT-S281 Series Table (Page 12)
・Correct paper width value for 58 mm on CT-S2000 Series Table (Page
13)
Add DLL to Installation Configuration
・Add MSVCP71.DLL (Page 10)
Correct as follows accompanied by the addition of Configuration Utility
Function;
・Replace drawings (Pages 11, 15 and 19)
・Correct description of [Paper Sensor Selection] for Printer Detailed
Setting
・Add [Code Page] description for Printer Detailed Setting
・4.5 Add Tool Menu (Page 26)
・4.6 Add Help Menu (Page 27)
09/06/26 Rev1.05
Add followings due to CT-S801 series correspondence
・Add CT-S801 to Object Model Table (Page 5)
・Add CT-S801 to Windows Driver Corresponding Table (Page 6)
・Add Number of Print Digit Table of CT-S801 (Page 13)
・Add CT-S801 Series to Printer Setting Table (Page 31)
Add the followings accompanied by USB Virtual COM Mode
Correspondence
・Change description regarding USB interface connection (Pages 5 and
6)
・Add USB Virtual COM Driver Correspondence Table (Page 7)
・Delete USB mode from memory switch setting condition for each
model (Pages 26, 28, 29 and 30)
Partially correct the Installation Configuration Drawing (Page 10)
Change as follows accompanied by the functional change of
Configuration Utility
・Replace main window images (Pages 11 and 17)
・Replace printer detailed setting image (Page 15)
・Change Write Time-Out Setting Value (Page 15)
・Delete [Paper Sensor Selection] (Page 15)
・Correct description for [Bit Image Size] and [Image Combined to
Printer Resolution] (Page 14)
09/11/10 Rev1.06
The CT-S601 model was added to each item.(Page 5, 6, 7, 15, 35)
09/11/25 Rev1.07
“58mm/35digit” is added to the print digit table. (Page 15)