Setup guide

CITIZEN OPOS DRIVER 1.8 Setup Guide
19
A window of [Network Setting] is displayed at NET designation. Enter [IP Address] and [Port
Number] to be used.
※ When [Print Server Setting] is clicked, the print server setting tool is booted up. Please refer to
the attached manual in the tool for the method of using the tool.
※ Set [Job Receive Time Out] at [Print Server Setting].
It is recommended to set [120] for the number of seconds until the connection being cut off.
After above setting, please click [Next].
6) Then the “Add new cash drawer” wizard starts.
Specify the number of cash drawers connected to the printer and click [Next].