Setup guide

CITIZEN OPOS DRIVER 1.8 Setup Guide

4) “Details of settings” window is displayed.

Settings of each item are as shown below.

Status Back interval

Set the polling interval for acquiring printer status.

Setting range: 100 to 900msec

Write Timeout

Set the write timeout for output port.

Setting range: 5000 to 1,000,000msec

International Char

Specify a international character table to use.

Set value: U.S.A/France/Germany/U.K./DenmarkI/Sweden/Itary/SpainI/Japan/Norway/Denmark II/

Spain II/Latin America/Korea

Code Page

Designate code page (Selection content differs by the model)

Setting Value: 437/ 850/ 852/ 857/ 858/ 860/ 863/ 864/ 865/ 866/ 874/ 932/ 998/ 999/ 1252/

User Defined/

SetBitmap Mode

Specify the bit image mode of the SetBitmap method. For details of this mode, refer to Application

Development Guide of this product.

Set value: NV bit image/Raster bit image

Bitmap image size

Specify the rate of print enlargement of the bit image registered in the SetBitmap method and

PrintBitmap method.

Set value: Normal/Double-Width/Double-Height/Quadruple

Map image with Printer Resolution

By setting the set-up to be valid, output the bit image designated by SetBitmap and PrintBitmap

according to printer resolution.

After the above setting, click [Next].