INSTRUCTION MANUAL
ENGLISH China Japan ESPAÑOL EN ITALIANO FR FRANÇAIS DEUTSCH PORTUGUÊS ES 中文（繁体字） 中文（简体字） DE IT PO BPC JJY Europe North America DCF77 WWVB Time signals available to this watch are as shown on the table. Les signaux d’heure disponibles sur cette montre sont indiqués dans le tableau. Las señales horarias disponibles para este reloj aparecen en la tabla. Die für diese Armbanduhr verfügbaren Zeitsignale sind in der Tabelle aufgeführt.
Thank you for your purchase of this Citizen watch. Before using the watch, read this instruction manual carefully to ensure correct use. After reading the manual, store it in a safe place for future reference. Be sure to visit the Citizen website at http://www.citizenwatch-global.com/ . Here you will find a variety of information such as electronic setting guides, answers to frequently asked questions, Eco-Drive recharging information and more.
Safety precautions — IMPORTANT This manual contains instructions that should be strictly followed at all times not only for optimal use, but to prevent any injuries to yourself, other persons or property.
Safety precautions ■ Important instructions are categorized and depicted in this manual as follows: (Following symbols are examples of Pictograms.) Warning (caution) symbol followed by prohibited matters. Warning (caution) symbol followed by instructions that should be followed or precautions that should be observed.
Features Radio controlled watch ■■ Receives time signals from one of the five signal stations in four regions in the world and automatically adjusts the time and calendar. 12 9 3 ■■ Alarm ■■ Chronograph 6 4 Sounds at the time set. Measures up to 60 minutes by 1 second. ■■ ■■ World time ■■ Eco-Drive Easy to see the time for a second time zone, anywhere in the world. No periodical battery replacement is needed. This watch is fueled by light.
CONTENTS Before using this watch. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Band adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Protective stickers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 How to use a specially designed crown/button. . . . . . . . . . . 10 Component identification. . . . . .
CONTENTS Receiving the signal manually (on-demand reception). . . . . . . . . . . . . . . . . . . . . . . . . . 29 Setting summer time (DST) . . . . . . . . . . . . . . . . . . . . . . . 32 Using the chronograph . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Using alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Charging your watch . . . . . . . . .
CONTENTS Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Checking and correcting the reference position. . . . . . . . . . 60 Symptom and Remedies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Eco-Drive watch handling precautions . . . . . . . . . . . . . . 70 Water resistance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before using this watch This watch has a rechargeable cell which is charged by exposing the dial to light. Expose the dial to direct sunlight regularly to charge the watch. For details of charging, see page 44 -. After unpacking, follow the steps below when starting time and calendar adjustment.
Before using this watch Band adjustment We recommend seeking the assistance of an experienced watch technician for sizing of your watch. If adjustment is not done correctly, the bracelet may unexpectedly become detached leading to loss of your watch or injury. Consult an authorized service center. Protective stickers Be sure to remove any protective stickers that may be on your watch (case back, band, clasp, etc.).
Before using this watch How to use a specially designed crown/button Some models are equipped with a specially designed crown and/or push button to prevent accidental operation. Screw down crown/button Unlock the crown/button prior to operate your watch. Unlock 10 Lock Screw down crown Rotate the crown counterclockwise until it releases from the case. Push the crown in to the case. With gentle pressure towards the case, rotate the crown clockwise to secure it to the case. Be sure to tighten firmly.
Before using this watch Recessed button Press the button with a non-marring narrow-tipped object. • Metal objects may cause marring or scratching of the button.
Component identification Hands and buttons 55 50 RIO F 10 10 KHI S DAC BKK AL M BJ S CHR Minute hand Crown 12 12 TY O AL M D SY 16 16 24 19 20 21 17 18 22 25 23 24 25 NOU 15 AKL 14 MDY 14 TME 13 OF F 13 T SE HN L 11 11 CHR 7 ALM 15 40 MA O 90 B DX NAUT. 35 STAT. 30 CHI NYC 40 Button B 90 60 S M T SE 19 20 21 17 18 22 30 80 O TME ON C AN 23 12 PAR 70 K AT H ON SMT OFF X LA Rotating bezel Function hand 70 KM.
Component identification Indication Power reserve level 55 PDL NO 50 LON KM. PAR 70 K AT H O RI O MA O NAUT. 35 STAT 30 CHI NYC . 40 T Day of week indication F 10 KHI W T S DAC 11 BJ S CHR 12 CHR 7 19 20 2 1 17 18 22 23 24 25 AKL NOU TY O AL M TME D SY 16 MDY 15 HN L Summer time (DST) indication (SMT ON/OFF) 14 OF F 13 ALM T SE C AN • A solar cell is under the dial.
Changing the mode This watch features the four different modes as follows: TME Shows ordinary time. CHR Mode for using the chronograph. ALM Mode for setting the alarm. 55 RX KM. LON PAR 70 PDL 50N and Mode for setting time calendar AT manually. H FE NO OK NAUT. 35 STAT.
55 PDL NO 50N KM. PAR 70 K AT H O RIO 45 RX LON F TME AL M BKK AL M CHR BJ S TY O 16 OF F AL M D SY 15 19 20 21 17 18 22 23 24 25 NOU T SE AKL 14 TME CHR 13 MDY T SE 12 T SE C AN HN L TME AL M 11 ALM Mode indication CHR S DAC 7 CHR NAUT. 35 STAT. 30 CHI NYC 40 10 T SE ON X LA A KHI W T ON SMT OFF TME DEN 0 1 2 60 90 24 B DX MA O 2 Rotate the crown to change the mode.
Checking the power reserve For details of charging, see “Charging your watch” (page 44). Checking the power reserve • See page 18 for instructions on how to read power reserve indication. B 1 Change the mode to [TME] (page 14 ) and push the crown in to position 0 . 2 Press and release the lower right button A . 0 1 2 A 16 The function hand indicates power reserve and the second hand indicates the previous reception result.
Checking the power reserve 55 PDL NO 50N LON KM. PAR 70 OK AT H RIO W T MA O T 90 NAUT. 35 STAT. 30 CHI NYC 40 S M B DX 60 F W T ON SMT OFF F 10 KHI S DAC ON SMT OFF 11 AL M T SE BJ S CHR 12 7 CHR ALM 13 TY O AL M OF F 14 TME 16 T SE C AN • Press button A to return to normal indication. It returns HN D L to normal indication automatically in about 10 seconds SY MDY NOU AKL without pressing the button.
Checking the power reserve Indication of power reserve in levels F F F F F W T F F W T 1 month - 3 days 3 days or shorter Power reserve is getting low. S T T F S SM W T F S M T Power reserve is OK. W T T W T T Power reserve is sufficient. S M W T W T 7 - 1 month 0 S SM M T T W T T W T T F S M 10 - 7 months OK for normal use. 18 1 S M W T T Meaning S SM M W T W T Duration (approx.
Checking the power reserve CAUTION • At the level “0”, the second hand starts to move once every two seconds (insufficient charge warning function, page 46). The function hand on the upper right sub dial always indicates the power reserve in this mode. In addition, functions other than time indication stop and become unavailable.
Checking the previous signal reception result For details of signal reception, see “About signal reception” (page 49). B 1 Change the mode to [TME] (page 14 ) and push the crown in to position 0 . 2 Press and release the lower right button A . The function hand indicates power reserve and the second hand indicates the previous reception result. 0 1 2 OK NO PDL 45 RX LON NO RX KM. 55 KM.
Checking the previous signal reception result B • Press button A to return to normal indication. It returns to normal indication automatically in about 10 seconds without pressing the button.
Checking the current world time setting For details of the world time, see “Setting the world time” (page 24). B 1 Change the mode to [TME] (page 14 ) and push the crown in to position 0 . 2 Press and release the upper right button B . RX OK NO RIO MA O NAUT. 35 STAT.
Checking the current world time setting B • Press button B to return to normal indication. It returns to normal indication automatically in about 10 seconds without pressing the button.
Setting the world time This watch can indicate the time around the world according to which of 24 time zones (offsets from UTC — Coordinated Universal Time) is chosen. • See page 22 to check which time zone is currently indicated. B 1 Change the mode to [TME] (page 14 ) and pull the crown out to position 2 . RX . 55 LON KM The second hand indicates the current time zone setting and PAR 70 50N PDL AT H FE the function hand indicates the current summer time (DST) 45 setting (page 32).
Setting the world time B 0 1 2 A 2 Rotate the crown to select an area. The hour and minute hands start moving as you finished to select an area. • For details of areas and time zones, see “Table of time zones and representative places” (page 26). • Pressing button B while the hands stops changes the summer time (DST) setting. 3 Push the crown in to position 0 to finish the procedure.
Setting the world time Table of time zones and representative places • Countries or regions may change time zones for various reasons. • When using the watch in an area not listed in the table, select an area name in the same time zone.
Setting the world time Time zone Second hand Area name +9 +10 +11 +12 -11 -10 -9 -8 -7 -6 -5 22 25 27 30 33 35 38 40 43 45 47 TYO SYD NOU AKL MDY HNL ANC LAX DEN CHI NYC Representative area Tokyo Sydney Noumea Auckland Midway Honolulu Anchorage** Los Angeles** Denver** Chicago** New York** Signal station Japan ◆Japan ◆USA USA Continued on the next page ➡ 27
Setting the world time Time zone Second hand Area name -4 -3 -2 -1 50 52 55 57 MAO RIO FEN PDL Representative area Manaus Rio de Janeiro Fernando de Noronha Azores* Signal station ◆USA ◆Germany • The offsets in the table are based on the standard time. • The areas whose “Signal station” has ◆ mark in the table are out of reception range and cannot receive its signals. • For an area with * or **, automatic change of summer time (DST) setting are linked.
Receiving the signal manually (on-demand reception) For details of signal reception, see “About signal reception” (page 49). • It may take 2 - 15 minutes to receive time signals. • Execute “Setting the world time” (page 24) before time signal reception. • Executing “Setting summer time (DST)” (page 32) previously makes things smoother in regions utilizing summer time (DST).
Receiving the signal manually (on-demand reception) B 1 Change the mode to [TME] (page 14 ) and push the crown in to position 0 . 2 Press and hold the lower right button A for 2 seconds A or more until the second hand points "RX". The second hand point to "RX" after indicating the previous reception result and signal reception starts. 55 PDL NO 50N KM. PAR 70 K AT H O NAUT. 35 STAT.
Receiving the signal manually (on-demand reception) B 0 1 2 A 3 Put the watch in the place with good conditions for time signal reception. • Do not move the watch as far as possible while the second hand points “RX”. After the reception finished, the reception result (OK/NO) is indicated and the watch returns to normal indication. To cancel signal reception Pressing button A while the second hand points “RX” cancels signal reception and the watch returns to normal indication.
Setting summer time (DST) Summer time (DST: Daylight Saving Time) is a system adopted in some countries/ areas to gain an extra daylight during summer. • In regions utilizing summer time (DST), the time signal includes summer time (DST) check signal. • The summer time (DST) period varies depending on the country or area. • The summer time (DST) rules may change depending on the country or area. About summer time (DST) setting • You can set summer time (DST) on or off for each time zone.
Setting summer time (DST) Checking the summer time (DST) setting 1 Change the mode to [TME] (page 14 ) and push the B crown in to position 0 . 2 Press and release the upper right button B . The second hand indicates the current time zone setting and the function hand indicates the current summer time (DST) setting. 55 PDL NO 50N RX LON KM.
Setting summer time (DST) SMT OFF 0 1 2 A 34 Summer time (DST) is indicated. ON SMT OFF S ON SMT OFF S F SMT ON T B Standard time is indicated. • Press button B to return to normal indication. It returns to normal indication automatically in about 10 seconds without pressing the button.
Setting summer time (DST) Changing the summer time (DST) setting 1 Change the mode to [TME] (page 14 ) and pull the B crown out to position 2 . 0 1 2 A The second hand indicates the current time zone setting and the function hand indicates the current summer time (DST) setting. 2 Rotate the crown to choose a time zone where you want to change the summer time (DST) setting. The time zone changes and the hour and minute hands start moving.
Setting summer time (DST) B 0 1 2 3 Press and release the upper right button B while the hands stop. SMT ON • Summer time (DST) is indicated. • Automatic switching of the summer time (DST) setting is activated. The summer time (DST) setting is automatically changed corresponding to reception of summer time (DST) signals. SMT OFF • The standard time is indicated. • Automatic switching of the summer time (DST) setting is deactivated.
Setting summer time (DST) B 4 Repeat steps 2 and 3 to execute the summer time (DST) settings of other time zones. 5 Push the crown in to position 0 to finish the 0 1 2 procedure. A Link of summer time (DST) setting In the following groups of areas, the summer time (DST) setting of all areas in a group is automatically changed when summer time (DST) signals are received in an area of the group.
Using the chronograph The chronograph on this watch can measure up to 60 minutes in 1 second increments. B 1 Change the mode to [CHR] (page 14 ) and push the crown in to position 0 . 0 minute 0 second is indicated. 0 1 2 A 38 2 Start measurement. • See the next page for the method of measurement. • Pulling out the crown will stop and reset the chronograph. 3 Change the mode to [TME] and push the crown in to position 0 to finish the procedure.
Using the chronograph 55 50 50N FE LON 70 KM. PAR 70 K AT H 80 O MA O 90 90 F 10 KHI W T 10 NAUT. 35 STAT.
Using alarm The alarm on this watch is based on the time indicated. It is based on the time of the time zone newly selected when the time zone setting of the world time is changed. Checking alarm setting 1 Change the mode to [ALM] (page 14 ) and push the B crown in50to55position70 0 . RX PDL NO FEN LON KM. PAR OK AT H NAUT. 35 STAT.
Using alarm B 0 1 2 A ALM ON Alarm sounds as the time set comes. ALM OFF No alarm sounds. • Each time you press button B , on/off of the setting changes alternately. 2 Change the mode to [TME] and push the crown in to position 0 to finish the procedure. The hands returns to normal. Checking the alarm Pressing button A in step 1 sounds the alarm for 5 seconds. Press the same button to stop the alarm sound.
Using alarm Changing alarm setting • The alarm time is set in 24-hour basis. B 0 1 2 A 1 Change the mode to [ALM] (page 14 ) and pull the crown out to position 2 . The hour, minute and 24-hour hands indicate the alarm time currently set and the second hand shows the alarm setting. 2 Rotate the crown to set the alarm time. • Check AM/PM referring to the 24-hour hand. • If you rotate the crown quickly a few times, the hand will move continuously.
Using alarm B 4 Change the mode to [TME] and push the crown in to position 0 to finish the procedure. The watch returns to normal indication. 0 1 2 A When the time set comes Alarm sounds for 15 seconds as the time set comes. • Alarm does not sound when the position of the crown is not 0 and/or the mode is not [TME] or [SET]. To stop alarm Press any of the buttons.
Charging your watch This watch has a solar cell under the dial and stores the power generated by the cell in its built-in rechargeable cell. The cell is charged by exposing the dial to light such as direct sunlight or fluorescent lamps. For optimal performance, be sure to: • Put the watch in a location where the dial is exposed to bright light such as by the window even when it is not used. • Expose its dial to direct sunlight for 5 or 6 hours at least every month.
Charging your watch CAUTION • Do not charge the watch at a high temperature (about 60°C (140°F) or higher) as doing so may cause movement malfunction. • If the watch is obscured from light by long sleeves frequently, supplemental charging may be needed to ensure continual operation. • The watch stops charging automatically after finishing (overcharging prevention function). The function prevents damage to performance of the watch and rechargeable cell due to overcharging.
S M 6 T F S 18 T 60 W Charging your watch 24 OF When the watch reaches a low charge state (insufficient charge 30 warning 12 function) TME LL E B L M F ON A OF F ON M LM CHR A L CH R T L- During the insufficient charge warning state TM When the power reserve becomes low, the second hand moves once every two seconds. This is the insufficient charge warning function. Be sure to fully charge your M TM E A watch immediately as outlined on page 47.
Charging your watch Charging time by environment Below are the approximate charging times when exposing to light continuously. Please use this table as a reference only. Charging time (approx.
Charging your watch Power save function The second hand stops automatically to save power when the watch has been kept in a dark place for a certain period of time and it cannot generate power. • The watch works normally even while saving power. • The alarm sounds even while saving power. • The power save function does not operate under the following conditions: --The crown is in position 1 or 2 . --The mode is [CHR] or [ALM].
About signal reception There are three ways to receive the time signal. Reception method Explanation Automatic reception The watch receives time signals automatically every night. On demand reception You can perform signal reception manually when required. (page 29) Recovery automatic reception The watch automatically receives time signals when it is charged enough after it stopped due to insufficient charge.
About signal reception When receiving the time signal FE 70 KM. PAR 70 K AT H S M 40 MA O S DAC BKK AL M BJS CHR 30 12 12 CHR 7 TY O AL M 15 15 16 16 NOU D SY 14 AKL 14 MDY TME 13 T SE 19 20 21 17 18 22 C AN OFF 13 ALM 25 23 24 25 HN L 11 11 TME ON 10 F 60 ON SMT OFF 10 KHI 90 B T DX W 24 NAUT. 35 STAT.
About signal reception Note on the time signal This watch receives time signals from the five signal stations located in four regions in the world.
About signal reception JJY About 2 000 km radius Kyushu station JJY About 1 500 km radius Fukushima station 52
About signal reception WWVB About 3 000 km radius Fort Collins station Continued on the next page ➡ 53
About signal reception DCF77 About 1 500 km radius Mainflingen station 54 BPC About 1 500 km radius Shangqiu station, Henan
About signal reception Poor reception areas It may be difficult to receive the time signal properly under certain environmental conditions or in areas susceptible to radio noise.
Adjusting the time and calendar manually B 1 Change the mode to [SET] (page 14 ) and pull the crown out to position 2 . The second hand points to 0 seconds and stops. 0 1 2 A 2 Press and release the lower right button A . The hour and minute hands move slightly. 3 Press and release the lower right button A repeatedly to change the hand/indication to be corrected.
Adjusting the time and calendar manually B 0 1 2 A 4. Rotate the crown to adjust the hand/indication. • The hour, minute and 24-hour hands move synchronously. • Check AM/PM referring to the 24-hour hand. • Year and month are indicated with the second hand. Set them referring to page 58. • Date indication changes to the next as the function hand rotates 5 times. • When you rotate the crown quickly a few times, the hands and date indication will move continuously.
Adjusting the time and calendar manually Month and year indications Set the year and month with the position of the second hand. “Month” corresponds to one of the 12 zones shown in the figure below. Each number means month.
Adjusting the time and calendar manually Year Years since leap year 2016 2020 2024 2028 2032 0 (Leap year) 2017 2021 2025 2029 2033 1 1st min. marker 2018 2022 2026 2030 2034 2 2nd min. marker 2019 2023 2027 2031 2035 3 3rd min. marker 55 PDL NO 50N KM. PAR 70 K AT H O NAUT. 35 STAT.
Troubleshooting Checking and correcting the reference position If the time or calender is not shown correctly even after proper reception of the time signal, check whether the reference position is correct. • If the hands and indication do not reflect the correct reference position, the time and calendar will not be indicated accurately even if the time signal is received. What is the reference position? Correct reference positions 50N RX LON KM. PAR 70 K AT H O NAUT. 35 STAT.
Troubleshooting B 0 1 2 A 1 Change the mode to [CHR] (page 14 ) and pull the crown out to position 2 . The hands and indication move to the current reference positions stored in memory and stop. 2 Check the reference positions of them referring to the illustration of the previous pages. Correct Push the crown in to position 0 to finish the procedure. Set the mode to [TME] after that. Wrong Proceed to step 3 and correct the reference position. 3 Press and release the lower right button A .
Troubleshooting B 0 1 2 A 62 4 Press and release the lower right button A repeatedly to change the hand/indication to be corrected. • Each time you press button A , the target changes as follows. Function hand/date indication → Hour/minute/24-hour hands → Second hand → (back to the top) • The hands and indications slightly move when selected to show they become adjustable. • The function hand points “60” (straight above) when the hour, minute, second and 24-hour hands are the targets of adjustment.
Troubleshooting B 0 1 2 A 5 Rotate the crown to adjust the hand/indication. • The hour, minute and 24-hour hands move synchronously. • Date indication changes to the next as the function hand rotates 5 times. • When you rotate the crown quickly a few times, the hand/ indication will move continuously. To stop the rapid movement, rotate the crown in either direction. 6 Repeat steps 4 and 5. 7 Push the crown in to position 0 . 8 Change the mode to [TME] to finish the procedure.
Troubleshooting Symptom and Remedies Symptom Remedies Page Cannot receive time signals Change the mode to [TME] and push the crown in to position 0 . Check power reserve. If the second hand is moving once every two seconds, you cannot • Manual reception (on perform time signal reception. demand reception) Check the world time setting. cannot be executed. • Automatic reception is Check whether the watch is in a receivable area. not executed. Check reception environment.
Troubleshooting Symptom Remedies Page Time/calendar is abnormal. Indication is incorrect even after successful reception. Change the mode to [TME] and push the crown in to position 0 . Check the world time setting. 14 24 Check the summer time (DST) setting. 32 Check and correct the reference position. 60 Adjust the time and calendar manually. 56 The summer time (DST) Change the summer time (DST) setting to “SMT setting does not change ON”. automatically.
Troubleshooting Symptom Remedies Page Movement of a hand seems strange 66 The hands rotate rapidly soon after you take the The power save function is canceled. Wait until the current time is displayed. watch out of a case or something similar. The hands move in an Check the current mode. unexpected direction. Check the current mode. The second hand does not move. Check power reserve. The second hand moves Power reserve is low. Charge immediately. once every two seconds.
Troubleshooting Symptom Remedies Page Movement of a hand seems strange (continued) • The world time setting is not indicated. • The summer time (DST) setting is not indicated. • No alarm sound is emitted. • Alarm sounds at an incorrect moment. Change the mode of the watch to [TME], push the crown in to position 0 and press button B. Check power reserve. When the second hand is moving once every two seconds, it is not indicated. Check whether the time and calendar is correct. Check power reserve.
Troubleshooting Resetting the watch — All Reset When the watch does not work properly, you can reset all the settings. If the power reserve is insufficient, charge the watch first. Be sure to perform the following operations after All Reset. 1 Correct the reference positions. After All Reset, the watch is in the reference position adjustment mode. Refer to step 3 and after on page 61. 2 Set the world time. (page 24) 3 Adjust the time and calendar.
Troubleshooting B 0 1 2 A 1 Change the mode to [CHR] (page 14 ) and pull the crown out to position 2 . The hands and indication move to the current reference positions stored in memory. • Proceed to the next step when the hands and indication stop. 2 Press and release both the lower right button A and upper right button B simultaneously. As you release the buttons, the alarm sounds and all reset is executed.
Eco-Drive watch handling precautions • For optimal performance, your watch should remain fully charged. • Long sleeves may inhibit light transmission to your watch. This may result in your watch loosing charge. In these cases supplemental charging may be necessary. • When you take off the watch, place it in a bright location to ensure optimal performance.
Eco-Drive watch handling precautions CAUTION Recharging Precautions • Do not charge the watch at a high temperature (about 60 °C (140 °F) or higher) as doing so may cause the movement to malfunction. Examples: • Charging the watch too close to a light source which generates a large amount of heat such as an incandescent lamp or halogen lamp. * When charging under an incandescent lamp, be sure to leave 50 cm (20 inches) or more between the lamp and the watch to avoid exposing the watch to excessive heat.
Eco-Drive watch handling precautions of Rechargeable Cell> cell that does not require periodical replacement. •
Eco-Drive watch handling precautions WARNING Use Only the Specified Battery • Never use a battery other than the rechargeable cell specified for use in this watch. Although the watch structure is designed so that it will not operate when another type of battery is installed, if a conventional watch battery or other type of battery is installed in the watch and the watch is recharged, there is the risk of overcharging which may cause the battery to rupture.
Water resistance WARNING Water Resistance • Refer to the watch dial and/or the case back for the indication of the water resistance of your watch. The following chart provides examples of use for reference to ensure that your watch is used properly. (The unit “1bar” is roughly equal to 1 atmosphere.) • WATER RESIST(ANT) ××bar may also be indicated as W.R.××bar.
ant Water resistance Water-related use Minor exposure to Swimming water (washing and general Skin diving, face, rain, etc.
Water resistance • Non-water resistant models are not designed to come into contact with any moisture. Take care not to expose a watch with this rating to any type of moisture. • Water resistance for daily use (to 3 atmospheres) means the watch is water resistant for occasional accidental splashing. • Upgraded water-resistance for daily use (to 5 atmospheres) means that the watch may be worn while swimming, but is not to worn while skin diving.
Precautionary items and usage limitations CAUTION To Avoid Injury • Be particularly careful when wearing your watch while holding a small child, to avoid injury. • Be particularly careful when engaged in strenuous exercise or work, to avoid injury to yourself and others. • Do not wear your watch while in a sauna or other location where your watch may become excessively hot, since there is the risk of burns.
Precautionary items and usage limitations CAUTION Precautions • Always use the watch with the crown pushed in (normal position). If the crown is of the screw lock-type, make sure it is securely locked. • Do not operate the crown or any push buttons when the watch is wet. Water may enter the watch causing damage to vital components.
Precautionary items and usage limitations CAUTION When Wearing Your Watch • Leather bands and rubber (urethane) bands will deteriorate over time due to perspiration dirt. Because of the natural materials, leather band will be worn, deformed, and discolored over time. It is recommended to replace the band periodically. • The durability of a leather band may be affected when wet (fading, peeling of adhesive), owing to the properties of the material. Moreover, wet leather may cause a rash.
Precautionary items and usage limitations CAUTION When Wearing Your Watch (continued) • Please request adjustment or repair of the band in the following cases: - You notice an abnormality with the band due to corrosion. - The pin of the band is protruding. • We recommend seeking the assistance of an experienced watch technician for sizing of your watch. If adjustment is not done correctly, the bracelet may unexpectedly become detached leading to loss of your watch or injury.
Precautionary items and usage limitations • Avoid dropping the watch or subjecting it to other strong impact. It may cause malfunctions and/or performance deterioration as well as damage to the case and bracelet. • The integrated circuits (IC) used in quartz watches are sensitive to static electricity. Please note the watch may operate erratically or not at all if exposed to intense static electricity.
Precautionary items and usage limitations CAUTION Always Keep Your Watch Clean • Rotate the crown while it is pressed in fully and press the buttons periodically so they do not become stuck due to accumulations of foreign matter. • The case and band of the watch come into direct contact with the skin. Corrosion of the metal or accumulated foreign matter may result in black residue coming from the bracelet when exposed to moisture or perspiration. Be sure to keep your watch clean at all times.
Precautionary items and usage limitations Caring for Your Watch • Wipe any dirt or moisture such as perspiration from the case and crystal with a soft cloth. • For metallic, plastic or synthetic rubber (polyurethane) band, clean it with soap and a soft toothbrush. Be sure to thoroughly rinse the band after cleaning to remove any soap residue. • For a leather band, wipe off dirt using a dry cloth.
Specifications Model Timekeeping accuracy (without reception) Operating temperature range Display functions Maximum run time from full charge Battery 84 E660 Analog solar-powered watch Type Average monthly accuracy: ±15 seconds when worn at normal operating temperatures between +5°C (41°F) and +35°C (95°F) ‒10°C (14°F) to +60°C (140°F) • Time: Hours, minutes, seconds, 24-hour • Calendar: Date, day of week • After charged fully, the watch runs without additional charging -when power save functions for 4
Specifications Additional functions • Solar power function • Overcharging prevention function • Insufficient charge warning function (two-second interval movement) • Power reserve indication (in four levels) • Energy saving function (power save feature) • World time (24 time zones by 1 hour) • Receiving time signal (automatic, on demand, recovery automatic), Signal stations: Japan (East/West)/ USA/Germany/China • Confirming reception status (RX) • Indicating the result of the last reception (OK/NO) • Sum
European Union directives conformance statement Hereby, CITIZEN WATCH CO.,LTD. declares that this product is in compliance with the essential requirements and other relevant provisions of directive 2014/53/EU and all other relevant EU directives. You can find your product’s Declaration of Conformity at “http://www.citizenwatch-global.com/ ”.
Model No.CB5＊ Cal.
