Operation Manual

202 203
The date will change by 1 day for every 5 rotation of the
function hand.
Allow the function hand to continue moving until the date has
reached 31.
When the date has reached 31, turn the crown to the left or
right by 1 click to stop the function hand.
Turn the crown to the right by 1 click to rotate the function
hand. After confi rming that the date is between 31 and 1, align
the function hand with MON.
•
[Position of the
date indication]
6 Return the crown to the normal position. Correction is now
complete.
* After setting the reference position, align the mode hand with
the time mode (TME) and perform on demand reception
to set the correct time before using the watch.
[Position of the
function hand]
Using the Slide Rule Bezel
Flying distance and other navigation
calculations as well as general
calculations can be performed using
the slide rule bezel located around
the outside of the dial. This slide
rule bezel is not able to display
decimal places for calculation
results, and should only be used as
a general reference as an alternative
to more accurate calculations.
Turning the crown at the 8:00
position allows the slide rule bezel
around the dial (Outside Scale) to
be rotated.
Crown for turning
the outside scale
Outside
scale
Inside scale