Specifications
Table Of Contents
- Front cover
- Trademarks
- Contents
- Remedy and measure after a report of error
- I Alarms
- 1. Operation Errors (M)
- 2. Stop Codes (T)
- 3. Servo/Spindle Alarms (S)
- 4. MCP Alarms (Y)
- 5. Safety Observation Alarms (Y)
- 6. System Alarms (Z)
- 7. Absolute Position Detection System Alarms (Z7*)
- 8. Emergency Stop Alarms (EMG)
- 9. Auxiliary Axis Operation Errors (M)
- 10. CNCCPU-side Safety Sequence Alarm(U)
- 11. Multi CPU Errors (A)
- 12. Network Errors (L)
- 13. Program Errors (P)
- II Parameters
- 1. Machining Parameters
- 2. Base Specifications Parameters
- 3. Axis Specifications Parameters
- 4. Servo Parameters
- 5. Spindle Parameters
- 6. Multi-CPU Parameters
- 7. FL-net Parameters
- 8. DeviceNet Parameters
- 9. Machine Error Compensation Parameters
- 10. PLC Parameters
- 11. Macro List
- 12. Position Switches
- 13. PLC Axis Indexing Parameters
- III PLC Devices
- Revision History
- Back cover
III PLC Devices
Special Relay/Register Signals
III - 116
Device abbrev. Signal name
SD120
SD121
SD122
SD123
SD124
SD125
SD126
SD127
Device abbrev. Signal name Device abbrev. Signal name
SD200 Switch status
(without internal device assignment)
SD210 Clock data Year/Month (same as SD62)
SD201 LED status SD211 Clock data Date/Hour (same as SD63)
SD212 Clock data Minute/Second (same as SD64)
SD203 CPU operation status SD213 Clock data Week (same as SD65)
SD204 LED display color