Specifications
Table Of Contents
- Front cover
- Trademarks
- Contents
- Remedy and measure after a report of error
- I Alarms
- 1. Operation Errors (M)
- 2. Stop Codes (T)
- 3. Servo/Spindle Alarms (S)
- 4. MCP Alarms (Y)
- 5. Safety Observation Alarms (Y)
- 6. System Alarms (Z)
- 7. Absolute Position Detection System Alarms (Z7*)
- 8. Emergency Stop Alarms (EMG)
- 9. Auxiliary Axis Operation Errors (M)
- 10. CNCCPU-side Safety Sequence Alarm(U)
- 11. Multi CPU Errors (A)
- 12. Network Errors (L)
- 13. Program Errors (P)
- II Parameters
- 1. Machining Parameters
- 2. Base Specifications Parameters
- 3. Axis Specifications Parameters
- 4. Servo Parameters
- 5. Spindle Parameters
- 6. Multi-CPU Parameters
- 7. FL-net Parameters
- 8. DeviceNet Parameters
- 9. Machine Error Compensation Parameters
- 10. PLC Parameters
- 11. Macro List
- 12. Position Switches
- 13. PLC Axis Indexing Parameters
- III PLC Devices
- Revision History
- Back cover
III PLC Devices
Special Relay/Register Signals
III - 114
Device abbrev. Signal name Device abbrev. Signal name
SD40 2n-second clock set SD50
SD41 SD51 Battery low latch
SD42 SD52 Battery low
SD43 SD53 AC/DC DOWN detection
SD44 SD54
SD45 SD55
SD46 SD56
SD47 SD57
SD48 SD58
SD49 SD59
Device abbrev. Signal name Device abbrev. Signal name
SD60 SD70 Cyclic transmission receive error detection counter for CPU No.3
SD61 SD71 Cyclic transmission receive error detection counter for CPU No.4
SD62 Clock data Year/Month SD72
SD63 Clock data Date/Hour SD73
SD64 Clock data Minute/Second SD74
SD65 Clock data Week SD75
SD66 Multi-CPU No. SD76
SD67 Cyclic transmission receive error threshold frequency setting SD77
SD68 Cyclic transmission receive error detection counter for CPU No.1 SD78
SD69 Cyclic transmission receive error detection counter for CPU No.2 SD79