Specifications
Table Of Contents
- Front cover
- Trademarks
- Contents
- Remedy and measure after a report of error
- I Alarms
- 1. Operation Errors (M)
- 2. Stop Codes (T)
- 3. Servo/Spindle Alarms (S)
- 4. MCP Alarms (Y)
- 5. Safety Observation Alarms (Y)
- 6. System Alarms (Z)
- 7. Absolute Position Detection System Alarms (Z7*)
- 8. Emergency Stop Alarms (EMG)
- 9. Auxiliary Axis Operation Errors (M)
- 10. CNCCPU-side Safety Sequence Alarm(U)
- 11. Multi CPU Errors (A)
- 12. Network Errors (L)
- 13. Program Errors (P)
- II Parameters
- 1. Machining Parameters
- 2. Base Specifications Parameters
- 3. Axis Specifications Parameters
- 4. Servo Parameters
- 5. Spindle Parameters
- 6. Multi-CPU Parameters
- 7. FL-net Parameters
- 8. DeviceNet Parameters
- 9. Machine Error Compensation Parameters
- 10. PLC Parameters
- 11. Macro List
- 12. Position Switches
- 13. PLC Axis Indexing Parameters
- III PLC Devices
- Revision History
- Back cover
III PLC Devices
Special Relay/Register Signals
III - 111
Device abbrev. Signal name Device abbrev. Signal name
SM80 SM90
SM81 SM91
SM82 Model judgment code (for GOT) SM92
SM83 Model judgment code (for GOT) SM93
SM84 Version information (for GOT) SM94
SM85 SM95
SM86 SM96
SM87 SM97
SM88 SM98
SM89 SM99
Device abbrev. Signal name Device abbrev. Signal name
SM100 SM110
SM101 SM111
SM102 SM112 CPU No. 1 reset flag
SM103 SM113 CPU No. 2 reset flag
SM104 SM114 CPU No. 3 reset flag
SM105 SM115 CPU No. 4 reset flag
SM106 SM116 CPU No. 1 error flag
SM107 SM117 CPU No. 2 error flag
SM108 SM118 CPU No. 3 error flag
SM109 SM119 CPU No. 4 error flag