Specifications
Table Of Contents
- Front cover
- Trademarks
- Contents
- Remedy and measure after a report of error
- I Alarms
- 1. Operation Errors (M)
- 2. Stop Codes (T)
- 3. Servo/Spindle Alarms (S)
- 4. MCP Alarms (Y)
- 5. Safety Observation Alarms (Y)
- 6. System Alarms (Z)
- 7. Absolute Position Detection System Alarms (Z7*)
- 8. Emergency Stop Alarms (EMG)
- 9. Auxiliary Axis Operation Errors (M)
- 10. CNCCPU-side Safety Sequence Alarm(U)
- 11. Multi CPU Errors (A)
- 12. Network Errors (L)
- 13. Program Errors (P)
- II Parameters
- 1. Machining Parameters
- 2. Base Specifications Parameters
- 3. Axis Specifications Parameters
- 4. Servo Parameters
- 5. Spindle Parameters
- 6. Multi-CPU Parameters
- 7. FL-net Parameters
- 8. DeviceNet Parameters
- 9. Machine Error Compensation Parameters
- 10. PLC Parameters
- 11. Macro List
- 12. Position Switches
- 13. PLC Axis Indexing Parameters
- III PLC Devices
- Revision History
- Back cover
II Parameters
FL-net Parameters
II - 130
<91st, 92nd word: Log information area>
Message transmission resend recognition count:
Indicates the accumulated count of resend recognition in the message frame.
<97th, 98th word: Log information area>
ACK error count:
Indicates the accumulated count of ACK header error detection.
<99th, 100th word: Log information area>
Serial No. version error count:
Indicates the accumulated count of serial No. version error detection (mis-match
detection).
<101st, 102nd word: Log information area>
Serial No. error count:
Indicates the accumulated count of serial No. error detection (non-continuous detection).
<103rd, 104th word: Log information area>
Node No. error count:
Indicates the accumulated count of node No. error detection.
<105th, 106th word: Log information area>
TCD error count:
Indicates the accumulated count of TCD (transaction code) error detection.
<121st, 122nd word: Log information area>
Token multiplexing recognition count:
Indicates the accumulated count of optional node address (including local node address)
tokens detected while the token is being held.
<123rd, 124th word: Log information area>
Token destruction count:
Indicates the accumulated count of node address tokens having a value that is less than
that of local node while the token is being held.
<125th, 126th word: Log information area>
Token resend count:
Indicates the accumulated count of token resends.
<133rd, 134th word: Log information area>
Token holding time-out count:
Indicates the accumulated count of time-out detections for token holding time-out time
(value that does not exceed the token monitoring time-out time.)
<135th, 136th word: Log information area>
Token monitoring time-out count:
Indicates the accumulated count of time-out detections for token monitoring time-out
time.
<145th, 146th word: Log information area>
Total operating time:
Indicates the total operation time.
<147th, 148th word: Log information area>
Frame wait status count:
Indicates the accumulated count that frame wait status has become.
<149th, 150th word: Log information area>
Participation count:
Indicates the accumulated count of local node participation.
<151st, 152nd word: Log information area>
Self-release count:
Indicates the accumulated count of self release (when token holding time for local node
up is generated 3 consecutive times).
<153rd, 154th word: Log information area>
Release-by-skip count:
Indicates the accumulated count of release by skip (local node address token is pulled
out 3 consecutive times).
<155th, 156th word: Log information area>
Other node release count:
Indicates the accumulated count of detections of other node releases.
<169th to 184th word: Log information area>
Participation node list:
Indicates the token participation status at the other node in bits.
0: Release / 1: Participation
---Setting range---
Within the number of device points set in the PC parameter's device setting.
bit15 bit0
169th word
170th word
Node 15
Node 31
Node 16
Node 1