Specifications

II Parameters
Spindle Parameters
II - 118
【#13196】 SP196 LMNL Base speed for load meter standard output (Low-speed coil)
Set the base speed of the standard output to be displayed as 100% in load meter.
When "0" is set, the base speed of the short-time rated output will be applied.
It is not available for MDS-DJ-SP Series.
---Setting range---
0 to 32767 (r/min)
【#13197】 SP197
Not used. Set to "0".
【#13198】 SP198
Not used. Set to "0".
【#13199】 SP199
Not used. Set to "0".
【#13200】 SP200
Not used. Set to "0".
【#13201】 SP201
Not used. Set to "0".
【#13202】 SP202
Not used. Set to "0".
【#13203】 SP203
Not used. Set to "0".
【#13204】 SP204
Not used. Set to "0".
【#13205】 SP205
Not used. Set to "0".
【#13206】 SP206
Not used. Set to "0".
【#13207】 SP207
Not used. Set to "0".
【#13208】 SP208
Not used. Set to "0".
【#13209】 SP209
Not used. Set to "0".
【#13210】 SP210
Not used. Set to "0".
【#13211】 SP211
Not used. Set to "0".
【#13212】 SP212
Not used. Set to "0".
【#13213】 SP213
Not used. Set to "0".
【#13214】 SP214
Not used. Set to "0".
【#13215】 SP215
Not used. Set to "0".
【#13216】 SP216
Not used. Set to "0".
【#13217】 SP217
Not used. Set to "0".
【#13218】 SP218
Not used. Set to "0".
【#13219】 SP219
Not used. Set to "0".