Specifications

II Parameters
Axis Specifications Parameters
II - 51
【#2038】 #2_rfp Reference position #2
Set the position of the second reference position from the zero point of the basic machine
coordinate.
---Setting range---
-99999.999 to 99999.999 (mm)
【#2039】 #3_rfp Reference position #3
Set the position of the third reference position from the zero point of the basic machine
coordinate.
---Setting range---
-99999.999 to 99999.999 (mm)
【#2040】 #4_rfp Reference position #4
Set the position of the fourth reference position from the zero point of the basic machine
coordinate.
---Setting range---
-99999.999 to 99999.999 (mm)
【#2049(PR)】 type Absolute position detection method
Select the absolute position zero point alignment method.
0 : Not absolute position detection
1: Stopper method (push onto mechanical stopper)
2: Marked point alignment method (align with marked point)
3: Dog-type (align using dog and contactless switch)
4: Marked point alignment method II (Align to alignment mark. Grid return won't be
performed after marked point alignment. )
9: Simple absolute position detection (Not absolute position detection, but the position
when the power is turned OFF is registered.)
Automatic initial setting is enabled only when the automatic stopper method is selected.
【#2050】 absdir Basic point of Z direction
Select the direction of the grid point immediately before the machine basic position (basic
point of detector) in the marked point alignment.
0: Positive direction
1: Negative direction
Reference position #3
(#2039 #3_rfp)
Basic machine coordinate
Reference position #4
(#2040 #4_rfp)
Reference position #2
(#2038 #2_rfp)
Reference position #1
(#2037 G53ofs)
Reference position #3
(#2039 #3_rfp)
Basic machine coordinate
Reference position #4
(#2040 #4_rfp)
Reference position #2
(#2038 #2_rfp)
Reference position #1
(#2037 G53ofs)
Reference position #3
(#2039 #3_rfp)
Basic machine coordinate
Reference position #4
(#2040 #4_rfp)
Reference position #2
(#2038 #2_rfp)
Reference position #1
(#2037 G53ofs)