Specifications

II Parameters
Base Specifications Parameters
II - 8
【#1037(PR)】 cmdtyp Command type
Set the G code list and compensation type for programs.
1 : List1(for M) Type A(one compensation amount for one compensation No.)
2 : List1(for M) Type B(shape and wear compensation amounts for one comp. No.)
3 : List2(for L) Type C(shape and wear compensation amounts for one comp. No.)
4 : List3(for L) Ditto
There are some items in the specifications that can be used or cannot be used according to
the value set in this parameter.
The file structure may also change depending on the compensation data type.
Thus‚ after changing this parameter‚ initialize the system with "#1060 SETUP".
(Note) Executing formatting in the above process will initialize the machining program, tool
offset data and common variables. Back up necessary machining programs, tool
offset data, and common variables in an external memory before initializing.
【#1038】 plcsel
Not used. Set to "0".
【#1039(PR)】 spinno Number of spindles
Select the number of spindles.
0: No spindle
1 to 7: One to Seven spindles
【#1040(PR)】 M_inch Constant input (inch)
Select the unit system for setting and display regarding machine parameter and PLC
interface's position, length and speed.
0: Metric system
1: Inch system
【#1041(PR)】 l_inch Initial state (inch)
Select the unit system for the program travel amount when the power is turned ON or reset
and for position display.
0: Metric system
1: Inch system
(Note) Selection of inch and metric unit
When the setting value of "#1041 I_inch" is changed, the unit of length is changed
after reset. The following parameters concerning length, however, are not changed
automatically. Change the setting values of following parameters according to the
new unit system.
(1) Tool compensation amount (Tool length compensation amount, tool wear compensation
amount and tool tip compensation amount)
(2) Workpiece coordinate offset
(3) Machining parameter
#8004 SPEED ("#8004 SPEED" is 10 inches/min. unit for the inch system. )
#8005 ZONE r #8006 ZONE d #8009 DSC. ZONE
#8010 ABS. MAX. #8011 INC. MAX. #8012 G73n
#8013 G83n #8016 G71 MINIMUM #8017 G71 DELTA-D
#8018 G84/G74n
(4) Axis parameter
#8204 OT-CHECK-N #8205 OT-CHECK-P
#8206 TOOL CHG.P #8209 G60 Shift
(5) Barrier data #8300-#8306
(6) Base specifications parameter #1084 RadErr
【#1042(PR)】 pcinch PLC axis command (inch)
Select the unit system for the commands to the PLC axis and the PLC indexing axis.
When changing the NC axis/PLC axis switchover to the PLC axis control, the command unit
is set in accordance with the parameter setting.
0: Metric system
1: Inch system
【#1043】 lang Select language displayed
Select the display language.
0: English (Standard)
1: Japanese (Standard)
11: German (Option)
12: French (Option)
13: Italian (Option)
14: Spanish (Option)
21: Polish (Option)
22: Simplified Chinese (Option)
# (1060) DATA ( 1) ( )
INPUT
"BASE PARA SET? (Y/N)" : N
INPUT
"FORMAT? (Y/N)" : Y
INPUT
"SETUP COMPLETE"
(Note)