Specifications

10. SETTING THE DATE (DATE IS CORRECTED BY DIGITAL DISPLAY)
1. Turn the crown and set the mode hand to the calendar [CAL] mode.
2. Press either button (A) or button (B) to access the city to be corrected.
3. When the crown is pulled out to the second click (date setting position),
the watch enters the date correction state.
4. When button (A) is pressed, the location to be corrected changes each time
it is pressed. Select the location to be corrected so that it is flashing.
When the crown is turned forward (clockwise), correction is made in the
positive direction. When the crown is turned backward (counter-clockwise),
correction is made in the negative direction. Turning the crown
continuously allows corrections to be made rapidly.
5. After corrections have been completed, return the crown to the normal
position.
Notes:
1. When the date is set for any one city, the dates of other cities, including
UTC time, are corrected automatically.
2. The year can be set from 2000 to 2099.
3. The day is corrected automatically when the year, month and date are set.
4. Since this watch is equipped with an auto-calendar function, it is not
necessary to correct the date at the end of the month.
5. When the date has been set to a non-existent date, the watch automatically
displays the 1st day of the following month when the watch is returned to
the normal display.
Return to Table of Contents
Return to Table of Contents