Specifications

O-Position Correction (Setting to the Watch Base ‘0’ Position)
When setting the 0-position of each hand, always make sure to turn the crown
forward (clock-wise) to set each hand to its 0-position in the clockwise
direction.
1. Turn the crown while in the normal position to set the mode hand to the
chronograph [CHR] mode.
2. Pull the crown out to the second click (0-position correction position).
a. The second, minute, hour and 24 hour hands rapidly advance to the
position stored in memory.
b. "F-H" lights during digital display 2 indicating that the watch is in
the correction state.
3. Turning the crown forward (clockwise) allows correction to be made in the
positive direction. Turning the crown continuously allows the 0-position to be
corrected continuously. Turn the crown right or left to stop rapid
advancement.
4. Pressing button (A) switches the correction location between "HR" (24-hour,
hour and minute hands) and "SEC" (second hand) and “F-H” (function hand) each
time button (A) it is pressed.
5. Turn the crown forward (clockwise) to align each hand at the 0-position at
each correction location. Although correction can be made in the negative
direction by turning the crown backward (counter-clockwise), always make sure
to set the 0-position by turning the crown forward to ensure that the 0-
position is set correctly.
a. The 24-hour hand is corrected in conjunction with the hour and minute
hands.
6. After correcting, return the crown to the normal position.
a. After correcting the 0-position of each hand, reset the time, calendar
and other modes before using the watch.
Note:
None of the buttons on the watch operate during movement of each hand.
Operate the buttons only after the hands have stopped moving.
Function Hand
Minute / Hour / 24-hour
Hands
Second Hand
Return to Table of Contents
Return to Table of Contents