Specifications

4. SWITCHING THE MODE (DISPLAY FUNCTIONS)

In addition to the time and date modes, this watch is also equipped with three a

race timer, chronograph, countdown timer as well as alarm 1 and alarm 1. The mode

can be switched by turning the crown. Check the current mode with the mode hand.

5. CHECKING O-POSITION OF EACH HAND

Before using this watch, check that the 0-position (based position of each hand)

is set correctly to ensure that the functions of the watch operate properly by

performing the following procedure.

<O-Position Check> 1. Turn the crown while in the normal

position to set the mode hand to the

chronograph [CHR) mode.

2. Pull the crown out to the first click (O-

position correction position). The

second, minute, hour, 24-hour and

Function hands rapidly advance to the 0-

position (12:00 position).

Note:

When each hand is not at the 0-position,

perform the "O-position correction"

procedure. If this 0-position is out of

alignment, each hand will not indicate the

correct position.

RACE

Race Timer

CAL

Calendar

TME

Time

CHR

Chronograph

Set

Zone Setting

AL-2

Alarm 2

AL-1

Alarm 1

TMR

Timer

Return to Table of Contents