Specifications

12. USING THE CHRONOGRAPH
The chronograph is able to measure and display time up to a maximum of 23 hours,
59 minutes, 59.99 seconds in 1/100th second units. After 24 hours have elapsed,
the chronograph automatically returns to the chronograph reset display (00'00"00)
and stops.
Normal Chronograph Display <Chronograph Measurement>
1. Turn the crown to set the mode hand
to the chronograph [CHR] mode. ( the
second hand rapidly advances to the
12:00 position and stops)
2. Pressing button A repeatedly starts
and stops the chronograph each time
it is pressed.
When starting the chronograph, the
second hand starts moving clockwise
in conjunction.
3. Split time is displayed for 10
seconds when button (B) is pressed
during chronograph measurement.
The “SPL” mark flashes in digital
display 1. IN addition, the second
hand also stops moving
4. Pressing button (B) while the
chronograph is stopped returns the
chronograph to the chronograph reset
display.
The Second and function hands (used
as the minute hand for the
chronograph) rapidly advance to and
stop at the 12:00 position.
Return to Table of Contents
Return to Table of Contents