Specifications
Table Of Contents
- CONTENTS
- 1. Features
- 2. Names of Components and Major Functions
- 3. Switching the Mode (Display Functions)
- 4. Checking 0-Position of Each Hand
- 5. Accessing Times or Dates of Major Cities
- 6. Switching Analog Time and Digital Time
- 7. Setting the Time (Time is corrected by digital display)
- 8. Setting the Date (Date is corrected by digital display)
- 9. Using the Alarm Mode
- 10. Using the Chronograph
- 11. Using the Destination Timer
- 12. Using Zone Setting
- 13. Low Battery Warning Function
- 14. EL Internal Illumination
- 15. All-Reset
- 16. Using the Register Ring
- 17. Precautions
- 18. Specifications
4544
15. All-Reset
When this watch indicates an abnormal display or does not function properly (no
display, alarm continues to sound, etc.) as a result of being subjected to the
effects of static electricity or strong impact and so forth, perform the all-reset
procedure described below.
Notes:
• The crown can only be operated to change the mode (crown 0 click
position).
• The buttons can only be used to change the city name (UP/DOWN).
• The EL light is not illuminated even if the button is pressed.
• The alarm tone does not sound even if the alarm is set.
• The chronograph stops measuring time even if measurement is in progress
and is reset.
• Although the destination timer tone does not sound even if measurement is
completed, measurement continues.
14. EL Internal Illumination
EL, which is the abbreviation for electroluminescence, is a phenomenon in
which light is emitted following the application of a voltage. This watch employs
a method whereby light is emitted by incorporating an EL substance in the
panel. EL illumination is turned on by pressing button (C).