Specifications
Table Of Contents
- CONTENTS
- 1. Features
- 2. Names of Components and Major Functions
- 3. Switching the Mode (Display Functions)
- 4. Checking 0-Position of Each Hand
- 5. Accessing Times or Dates of Major Cities
- 6. Switching Analog Time and Digital Time
- 7. Setting the Time (Time is corrected by digital display)
- 8. Setting the Date (Date is corrected by digital display)
- 9. Using the Alarm Mode
- 10. Using the Chronograph
- 11. Using the Destination Timer
- 12. Using Zone Setting
- 13. Low Battery Warning Function
- 14. EL Internal Illumination
- 15. All-Reset
- 16. Using the Register Ring
- 17. Precautions
- 18. Specifications
39
<Registration of Arbitrary City and Time Difference>
1. Turn the crown while in the normal position and set the mode hand to the
zone setting [SET] mode.
2. When the crown is pulled out to the second click, the watch enters the
correction state for the third letter of the city name.
38
<Using Zone Setting>
1. Turn the crown while in the normal position and set the mode hand to the
mode setting [SET] mode.
2. The city can be changed by pulling out the crown to the first click (for
changing cities between SET and OFF and for setting the location for
switching to daylight savings time).
3. Turn the crown to access the city to be set.
• Turning the crown continuously causes the cities to advance rapidly.
4. Press button (A) to set the city and press button (B) to set daylight savings
time.
5. After setting, return the crown to the normal position.
<Confirming Set Cities>
1. When button (A) or button (B) is pressed when the watch is in the zone
setting [SET] mode (with the crown in the normal position), the city name and
SET or OFF are displayed each time the button is pressed.
• Only those cities for which SET is displayed can be accessed from each
mode.