Specifications
Table Of Contents
- CONTENTS
- 1. Features
- 2. Names of Components and Major Functions
- 3. Switching the Mode (Display Functions)
- 4. Checking 0-Position of Each Hand
- 5. Accessing Times or Dates of Major Cities
- 6. Switching Analog Time and Digital Time
- 7. Setting the Time (Time is corrected by digital display)
- 8. Setting the Date (Date is corrected by digital display)
- 9. Using the Alarm Mode
- 10. Using the Chronograph
- 11. Using the Destination Timer
- 12. Using Zone Setting
- 13. Low Battery Warning Function
- 14. EL Internal Illumination
- 15. All-Reset
- 16. Using the Register Ring
- 17. Precautions
- 18. Specifications
3534
<Changing Destination City Name, Arrival Time and Arrival Date>
1. When the city name, arrival time and arrival date are changed once they
have been set, the remaining time is recalculated and displayed based on
the new city name, arrival time and arrival date.
Note:
1. If the city name set with the destination timer is set to "OFF" with the zone
setting function and the watch is again returned to the destination timer,
"ER" is displayed and the next city name (in the UP direction) is displayed
for the city name.
<Setting Range and Display Range>
Setting range: From 12:00 AM on January 1, 2000 to 11:59 PM on December
31, 2099
City names that can be set: Those cities that have been set to "ON" with the
zone setting function
Display range:
When displaying remaining time:
• Remaining time is displayed from 99 hours, 59 minutes and 59 seconds to
0 hours, 00 minutes and 00 seconds. "ER" is displayed when the
remaining time exceeds 100 hours.
When displaying elapsed time:
• Elapsed time is displayed from 0 hours, 00 minutes and 00 seconds to 99
hours, 59 minutes and 59 seconds. The display changes to "ER" when the
elapsed time exceeds 100 hours.
Note:
1. Time is continued to be measured inside the watch even when "ER" is
displayed.