User`s manual

BD2-2880/2890 User’s Manual
18
Memory error
Cutter lock (Cutter error)
Head –up
VP voltage error
Head temperature error
Macro execution wait
Error
Blinking cycle of 200ms
Blinking cycle of 150ms(3 times)
and 500ms(1 time).
Illuminated until reverted
Illuminated until reverted
Blinking cycle of 1 sec.
Blinking cycle of 500ms.
DescriptionDisplay Pattern
8.3 Errors Indication
The errors other than no paper are indicated by a LED output (Illumination or blinking) of the
Pin 20 (ERROR) of the CN3 (Interface connector).