User`s manual

BD2-2880/2890 User’s Manual
64
GS k n [ d ] k NUL
Printing the Bar Code
<1D>H<6B>H<n> [ < d> ] k <00>H
{0 =< n =< 7} Data are described in Hex code.
Specifying a type of bar code and printing bar codes.
•
The beginning of line is considered as the next printing start position.
•
Depending on the value of n, the following bar code can be selected.
d indicates a character code to be printed and k indicates the number of character to be
printed.
n (Hex) Bar Code System Maximum Columns
0 UPC-A ---
1 UPC-E ---
2 JAN13 (EAN) ---
3 JAN 8 (EAN) ---
4 CODE 39 13
5 ITF 22
6 CODABAR (NW-7) 17
7 CODE 128 15
•
When data being held in the print buffer, this command is ignored.
•
Regardless of the specified feed pitch, this command feeds the paper to be required to
print a bar code.
•
If the character code d cannot be printed in the respective bar code system, the bar
code so far will be printed, processing the subsequent data as normal data.
•
When a bar code whose number of characters to be printed is fixed has been selected,
the number of characters k have to be always made equal to the number of characters
to be printed. (The bar code is not printed when not matching.)
•
When the horizontal direction exceeds one line length, the excess part is not printed.
•
The initial va
lue is not specified.
[Function]
[Code]
[Range]
[Outline]
[Caution]
[Default]