User`s manual

BD2-2860 User’s Manual

CITIZEN

GS ^n1n2n3

[Function] Executing the Macro

[Code] <1D>H<5E>H<n1><n2><n3>

[Range] {0=<n1=<FF}

{0 =< n2 =< FF}

{0 =< 3 =< 1} Data is described in Hex code.

[Outline] Executing contents defined in macro.

•

"n1~ n3" indicate as follows:

n1 : The number of times of macro execution

n2 : Waiting time on macro execution

Waiting time of n2 x 100msec is given for every execution.

n3 : Macro execution mode

n3 Mode

0 Continuous execution

1 ExecutionbyLFSW

Continuous execution: The Macro is executed n1 times continuously at the time

intervals specified by n2.

ExecutionbyFEEDS: Afterwaitingforlapseoftimespecifiedbyn2,theALAME

LED flickers and the LF switch is waited to be pressed. When

it is pressed, the macro is executed once.

This action is repeated n1 times.

[Caution] • When this command is received while in macro definition, suspension of macro definition is

indicated. At this time, the defined content is cleared.

• No execution takes place when macro is held undefined or n1=0.

• While in macro execution with n3=1, paper feed with the LF SW is not available.

[Default] • Initially, this command is not specified.

[See Also] GS :

[Sample Program] [Print Results]

See Sample Program and Print Results for GS : on Page 74.