User`s manual

BD2-2860 User’s Manual

CITIZEN

GS / m

[Function] Printing the Download, Bit Image

[Code] <1D>H<2F>H<m>

[Range] {0 =< m =< 03} Data is described in Hex code.

[Outline] Prints download bit image in a mode specified by m.

•

Modes can be selected by m are shown below.

m Mode Name Dot Density in

Vertical Direction

Dot Density in

Horizontal Direction

0 Normal mode 203 DPI 203 DPI

1 Double wide mode 203 DPI 101 DPI

2 Double high mode 101 DPI 203 DPI

3 Double wide/double high mode 101 DPI 101 DPI

[Caution] • When data exist inside the print buffer, this command is ignored.

• When a download bit image has not been defined, this command is ignored.

• A portion of a download bit image exceeding one line length is not printed.

• A download character and a download bit image cannot be defined simultaneously.

• If a download bit image data is defined while it is being printed with this command, printing

operation may become unstable (fluctuating print pitch).

[Default] • The initial value is not specified.

[See Also] GS *

[Sample Program] [Print Results]

See Sample Program and Print Results for GS * on Page 71.