User`s manual

BD2-2860 User’s Manual

CITIZEN

ESC ¥ n1 n2

[Function] Specifying the Relative Positions

[Code] <1B>H<5C>H<n1>< n2>

[Range] {0=<n1=<FF}

{0 =< n2 =< FF} Data is described in Hex code.

[Outline] The printing start position is specified in the number of dots(1/203 inch unit) from

the current position.

• Rightward direction is taken as plus and leftward direction as minus.

•

To specify N dot in minus (left) direction, use a complement of N for assignment.

–

N dots = 65536

–

• The number of dots is divided by 256, whose quotient is taken as n2 and the residual as n1.

[Caution] • Specifying exceeding the top of line or the end of line is ignored.

[Default] • The initial value is not specified.

[See Also] ESC $

[Sample Program] [Print Results]

See Sample Program and Print Results for ESC $ on Page 61.