User`s manual

BD2-2860 User’s Manual

CITIZEN

ESC c5 n

[Function] Enabling/Disabling Panel Switches

[Code] <1B>H<63>H<35>H<n>

[Range] {0 =< n =< FF} Data is described in Hex code.

[Outline] Selecting the LF switch valid/invalid.

• "n" is valid only in the lowest bit (n0).

• "n" bit means the followings.

n0 Condition

0 LFSW valid.

1 LFSW invalid.

[Caution] When the panel switch is disabled with this command, the LF switch is disabled. Therefore,

the paper cannot be fed by operating the LF switch.

[Default] • The initial value of n is "0".

[Sample Program]

LPRINT CHR$ (&H1B) + "c5" + CHR$ (0); ………When enabling the LF switch

LPRINT CHR$ (&H1B) + "c5" + CHR$ (1); ………When disabling the LF switch