User`s manual

BD2-2860 User’s Manual

CITIZEN

ESC a n

[Function] Aligning the characters

[Code] <1B>H<61>H<n>

[Range] {0 =< n =< 2} Data is described in Hex code.

[Outline] All the printed data within one line are aligned in the specified position.

• Depending on n value, positional alignment is carried out as in the table below:

n (Hex) Position

0 Left end alignment

1Centering

2 Right end alignment

[Caution] • This is valid only when n is inputted at the beginning of line.

• The initial value of n is "0".

[Sample Program]

LPRINT CHR$ (&H1B) + "a" + CHR$ (0);

LPRINT "AAAAA" + CHR$ (&HA);

LPRINT CHR$ (&H1B) + "a" + CHR$ (1);

LPRINT "AAAAA" + CHR$ (&HA);

LPRINT CHR$ (&H1B) + "a" + CHR$ (2);

LPRINT "AAAAA" + CHR$ (&HA);

[Print Results]