User`s manual

BD2-2860 User’s Manual

CITIZEN

ESC – n

[Function] Specifying/ Canceling Underline

[Code] <1B>H<2D>H<n>

[Range] {0 =< n =< 02} data is described in Hex code.

[Outline] Specifying/canceling an underline.

• Types of underlines by n value are shown below:

n (Hex) Type

0 Canceling an underline.

1 Specifying an underline for 1-dot width.

2 Specifying an underline for 2-dots width.

[Caution] • An underline is attached to the full character width. It is, however, not attached to

the part having been skipped by horizontal tab command.

• An underline is not attached to a 90 °- right-turned characters.

• Specification/cancellation with this command is invalid to Kanji.

[See Also] ESC !, FS

–

[Sample Program]

LPRINT CHR$ (&H1B) + "–" + CHR$ (0);

LPRINT "AAAAA" ;

LPRINT CHR$ (&H1B) + "

–" + CHR$ (1);

LPRINT "AAAAA" + CHR$ (&HA);

[Print Results]