User`s manual

BD2-2860 User’s Manual

CITIZEN

ESC ! n

[Function] Collective Specifying Printing Mode

[Code] <1B>H<21>H<n>

[Range] {0 =< n=< FF} Data is described in Hex code.

[Outline] Printing mode is assigned. Each n bit indicates the following:

Value

Bit Function 0 1

0 Character Font Font A Font B

1 Undefined

2 Undefined

3 High-lighting Canceled Specified

4 Double height Canceled Specified

5 Double width Canceled Specified

6 Undefined

7 Underline Canceled Specified

[Caution] • With double height and double width being specified simultaneously, double wide and

double high characters are consisted.

• An underline is attached to the full character width, which, however, is not attached to

the part having been skipped by the horizontal tab.

Neither is it attached to 90°-right-turned characters.

• The underline width is as having been specified by <ESC ->.

(The default setting is 1 dot width. )

• Specification with this command is invalid to Kanji, except specification and cancellation

of highlighting

• In case that double wide character and normal character exist in same one line, the layout

of underline is consistent one.

[Default] n = 0

[See Also] ESC E, ESC

–