User`s manual

BD2-2860 User’s Manual

CITIZEN

8.3 Error Indication

The errors other than no paper are indicated by a LED output (Illumination or blinking) of the

Pin20 (ERROR) of the CN3 (Interface connector).

Error Display Pattern Description

Memory error Blinking cycle of 200ms

Cutter lock (Cutter error) Blinking cycle of 150ms(6 times)

and 500ms(1 time).

Head –up Illuminated until reverted

VH voltage error Illuminated until reverted

Head temperature error Blinking cycle of 1 sec.

Macro execution wait Blinking cycle of 500ms.