Specifications

2. BASIC SPECIFICATIONS

2.1

Printing Specifications

1) Print method: Line thermal print method (Thermal printing system)

2) Dot configuration: LT222X: 432 dots/line, LT232X:576 dots/line

3) Dot density: 8 dots/mm (203 dpi)

4) Print area: LT222X: Max. 54 mm, LT232X: Max. 72 mm

5) Number of print columns:

LT222X: Max. 36 columns, LT232X: Max. 48 columns (12×24: Font A)

LT222X: Max. 48 columns, LT232X: Max. 64 columns (9×24: Font B)

LT222X: Max. 54 columns, LT232X: Max. 72 columns (8×16: Font C)

LT222X: Max. 18 columns, LT232X: Max. 24 columns (24×24: Kanji Font A)

LT222X: Max. 27 columns, LT232X: Max. 36 columns (16×16: Kanji Font C)

6) Character spacing: Selectable by use of command

7) Print speed: Max. 1200 dot-lines/sec (150 mm/sec)

8) Paper feed: Feed pitch: 0.125 mm

9) Line feed width: 4.23 mm (1/6 inch) settable by user

10) Print head: Line thermal print head

11) Emulation: ESC/POS compliant

Notes:

• The above printing speed is under the condition of 24.0 V, 25°C, printing duty of 12.5%.

• Print speed may be delayed depending on the setting of printing condition or combination of

commands.