Specifications

1
1. GENERAL OUTLINE
・This control board is used for controlling LT222X/232X through computer, etc.
・As it has a variety of functions, it can meet various kinds of applications.
* This specification applies only to control board BD2-2220/2221
* The information contained herein is subject to change without prior notice.
* Transfer, copy, reproduction, or alteration of this document is prohibited without permission of
Citizen Systems Japan Co., Ltd.
1.1
Features
1) Ultra-small design
2) High speed (150 mm/sec) printing
3) Applicable to the width of 80 mm (LT232X) and 58 mm (LT222X).
4) Built-in input buffer
5) Barcode printing (By special command)
6) Free printing layout by page mode
7) Registration of user-defined characters and logos into flash memory
8) Auto cutter control
9) No paper and paper near-end detection
10) Various kinds of functional selection by memory switch
11) Support JIS level 1 and level 2
12) User-defined characters are available. (94 characters)
13) Mounting hole position is the same as that of LT2X20.