Specifications

42
○
Bar Code Commands
Control
Command
Function Mode GS P
GS H Selecting of printing position of HRI characters
S・P
GS f Selecting the font of HRI characters
S・P
GS h Specifying the height of the bar code
S・P
GS k Printing the bar code
S・P
GS w Specifying the horizontal size (magnification) of bar code
S・P
○ Commands for Flash Memory
Control
Command
Function Mode GS P
FS p
Printing the bit image in flash memory S
FS q
Defining the bit image in flash memory S
○ Printer Setting Commands
Control
Command
Function Mode GS P
GS ( E User-defined command S
GS ( K Selecting print control method S
GS ( M Customizing the printer S
○ Other Commands
Control
Command
Function Mode GS P
DLE ENQ Real-time request to printer
S・P
DLE DC4 Clearing buffer
S・P
ESC = Data input control
S・P
ESC @ Initializing the printer
S・P
ESC L Selecting PAGE MODE S
ESC S Selecting STANDARD MODE P
GS ( A Execution of test printing S
GS I Sending the printer ID
S・P
GS P Specifying the basic calculation pitch
S・P
Notes:
• In the Mode column: S = STANDARD MODE, P = PAGE MODE.
• { = shows the command affected by GS P.