Specifications

41
○ Line Feed Span Commands
Control
Command
Function Mode GS P
ESC 2 Specifying 1/6-inch line feed rate
S・P
ESC 3 Setting line feed rate of minimum pitch
S・P ○
○ Bit Image Commands
Control
Command
Function Mode GS P
ESC * Specifying the bit image mode
S・P
GS * Defining the download bit image
S・P
GS / Printing the downloaded bit image
S・P
GS v 0 Printing of raster bit image S
○ Status Commands
Control
Command
Function Mode GS P
DLE EOT Sending status in real-time
S・P
GS a Enabling/disabling ASB (Automatic Status Back)
S・P
GS r Sending status
S・P
○ Paper Detecting Commands
Control
Command
Function Mode GS P
ESC c 3
Selecting the Paper Sensor valid for Paper-end signal
output
S・P
ESC c 4 Selecting the Paper Near-end Sensor valid for print stop
S・P
○ Panel Switch Commands
Control
Command
Function Mode GS P
ESC c 5 Enabling/disabling the panel switches
S・P
○ Macro Commands
Control
Command
Function Mode GS P
GS : Starting/ending macro definition
S・P
GS ^ Executing the macro
S・P
○ Cutter Commands
Control
Command
Function Mode GS P
ESC i Cutting the paper partially
S・P
ESC m Cutting the paper partially
S・P
GS V Cutting the paper
S・P ○