Specifications

40
8. PRINT CONTROL COMMANDS
○ Print Control Commands
Control
Command
Function Mode GS P
LF Printing and paper feed
S・P
CR Back to printing
S・P
FF Printing in page mode and recovery P
ESC FF Printing data in PAGE MODE P
ESC J Printing and feeding paper in minimum pitch
S・P ○
ESC d Printing and feeding the paper by “n” lines
S・P
○ Print Character Commands
Control
Command
Function Mode GS P
CAN Canceling print data in PAGE MODE P
ESC SP Setting the right spacing of the character
S・P ○
ESC ! Collectively specifying the printing mode
S・P
ESC % Specifying/canceling download character set
S・P
ESC & Defining the download characters
S・P
ESC - Specifying/canceling underline
S・P
ESC ? Deleting download characters
S・P
ESC E Specifying/canceling emphasis printing
S・P
ESC G Specifying/canceling double strike printing
S・P
ESC M Selection of character fonts
S・P
ESC R Selecting the international character set
S・P
ESC V Specifying/canceling 90°-right-turned characters S
ESC t Selecting the character code table
S・P
ESC { Specifying/canceling the inverted characters S
GS ! Specifying the character size
S・P
GS B Specifying/canceling the black/white inverted printing
S・P
GS b Specifying/canceling the smoothing
S・P
○ Print Position Commands
Control
Command
Function Mode GS P
HT Horizontal tab
S・P
ESC $ Specifying the absolute positions
S・P ○
ESC D Setting horizontal tab position
S・P
ESC T Selecting the character printing direction in PAGE MODE P
ESC W Defining the print area in PAGE MODE P
○
ESC ＼
Specifying the relative position
S・P ○
ESC a Aligning the characters S
GS $
Specifying the absolute vertical position of characters in
PAGE MODE
P
○
GS L Setting the left margin S
○
GS W Setting the print area width
S・P ○
GS ＼
Specifying the relative vertical position of a character in
PAGE MODE
S・P ○