Specifications

5.3

Feed Switch

Function

• When pressed once, paper feed of one line occurs based on the amount of line feed set by ESC 2

and ESC 3.

However, paper feed is not available in the following cases.

(1) When the FEED switch is set to disable by ESC c 5

(2) When paper-end detector detected no paper

(3) With Head Up. (LT2220/2310 is used)

(4) With Platen Open (LT2221/2321 is used)

(5) When error occurred

(6) When waiting for macro execution (execution of macro by the FEED switch), pressing the

FEED switch causes the macro to be executed.

• At the time of Cutter Lock error, pressing the FEED switch after removing the cause clears the

error. (Depending on the status of MSW3-1)