Specifications

15
4.4
Motor Connector (CN4)
Pin assignment
Pin
Signal
Name
Input/Output Function
1 MOTOR A+ Output Motor driving signal A+
2 MOTOR B- Output Motor driving signal B-
3 MOTOR A- Output Motor driving signal A-
4 MOTOR B+ Output Motor driving signal B+
Connector used: 53047-0410 (Molex)
4.5
Auto Cutter Connector (CN5)
Pin assignment
Pin
Signal
Name
Input/Output Function
1 M+ Output Cutter Motor driving signal M+
2 M- Output Cutter Motor driving signal M-
3 GND
－
GND
4 SW Input Cutter Switch input signal
Connector used: 5267-04A-X (Molex)
* Use dedicated cutter (ACS-220/230 series) for cutter.
* If cutter is not used, short the auto cutter feature of JP1.