User`s manual

BD2-1220/1221 Users Manual
27
Panel Switch Command
Macro Commands
Cutter Command
Bar Code Commands
Flash Memory Commands
Command Function Mode Code
GS H Selecting of printing position of HRI characters S, P 1Dh, 48h, n
GS f Selecting the font of HRI characters S, P 1Dh, 66h, n
GS h Specifying the height of the bar code S, P 1Dh, 68h, n
GS k Printing the bar code S, P 1Dh, 6Bh, m, [d]k,
00h, 1Dh, 6Bh, m, n,
[d]k
GS w Specifying the horizontal size S, P 1Dh, 77h, n
(magnification) of bar code
Command Function Mode Code
ESC c 5 Making LF-SW signal valid/invalid S, P 1Bh, 63h 35h, n
Command Function Mode Code
GS : Starting/Ending macro definition S, P 1Dh, 3Ah
GS ^ Executing the macro S, P 1Dh, 5Eh, n1, n2, n3
Command Function Mode Code
GS V Cutting the paper S, P 1Dh, 56h, m
1Dh, 56h, m, n
Command Function Mode Code
FS g 3 Writing data into flash memory S 1Ch, 67h, 33h, m,
a1, a2, a3, a4, nL,
nH, d1,..., dk
FS g 4 Reading data from flash memory S 1Ch, 67h, 34h, m,
a1, a2, a3, a4, nL, nH
FS p Printing bit image on flash memory S 1Ch, 70h, n, m
FS q Defining bit image on flash memory S 1Ch, 71h, n,
[xL, xH, yL, yH,
[d]k] n