User`s manual

BD2-1220/1221 User’s Manual

Print Position Commands

Line Feed Span Commands

Bit Image Commands

Status Commands

Paper Sensor Commands

Command Function Mode Code

HT Horizontal tab S, P 09h

ESC $ Specifying the absolute positions S, P 1Bh, 24h, n1, n2

ESC D Setting horizontal tab position S, P 1Bh, 44h, [n]k, 00h

ESC T Selecting the character printing direction in P 1Bh, 54h, n

PAGE MODE

ESC W Defining the print area in PAGE MODE P 1Bh, 57h, xL, xH, yL,

yH, dxL dxH, dyL,

dyH

ESC \ Specifying the relative position S, P 1Bh, 5Ch, nL, nH

ESC a Aligning the characters S 1Bh, 6lh, n

GS $ Specifying the absolute vertical position of P 1Dh, 24h, nL, nH

characters in PAGE MODE

GS L Setting the left margin S 1Dh, 4Ch, nL, nH

GS W Setting the print area width S 1Dh, 57h, nL, nH

GS ¥ Specifying the relative vertical position P 1Dh, 5Ch, nL, nH

of a character in PAGE MODE

Command Function Mode Code

ESC 2 Setting initial line feed span S, P 1Bh, 32h

ESC 3 Setting line feed span S, P 1Bh, 33h, n

Command Function Mode Code

ESC * Specifying the bit image mode S, P 1Bh, 2Ah, m, n1, n2,

[d] k

GS * Defining the download bit image S, P 1Dh, 2Ah, n1, n2,

[d] n1* n2* 8

GS / Printing the downloaded bit image S, P 1Dh, 2Fh, m

GS v 0 Printing of raster bit image S 1Dh, 76h, 30h, m,

xL, xH, yL, yH, [d]k

Command Function Mode Code

DLE EOT Sending status in real-time S, P 10h, 05h, n

GS a Enabling/Disabling ASB (Automatic Status Back) S, P 1Dh, 61h, n

GS r Sending status S, P 1Dh, 72h, n

Command Function Mode Code

ESC c 3 Selecting the Paper Sensor valid for paper end S, P 1Bh, 63h, 33h, n

signal output

ESC c 4 Selecting the Paper Near-end Sensor valid for S, P 1Bh, 63h, 34h, n

print stop