User`s manual

BD2-1220/1221 User’s Manual
11
(3) Code Page
Code Page J1 J2 J3 J4
PC437 (USA, EU Standard) Short Short Short Short
Katakana (Japanese) Open Short Short Short
PC850 (Multilingual) Short Open Short Short
PC860 (Portuguese) Open Open Short Short
PC863 (Canadian-French) Short Short Open Short
PC865 (Nordic) Open Short Open Short
PC852 (Eastern Europe) Short Open Open Short
PC866 (Russian) Open Open Open Short
PC857 (Turkish) Short Short Short Open
Windows Code Open Short Short Open
Not defined Short Open Short Open
Not defined Open Open Short Open
Not defined Short Short Open Open
Unused Open Short Open Open
Not defined Short Open Open Open
Blank page Open Open Open Open
* When Katakana is selected, the international character is set for Japanese. Otherwise, it is set for
USA.
* “Blank page” is an area for user registration, and is blank (Space) by default.
4.3 Preset Jumper
The control board allows the user to choose from serial and parallel interfaces:
Function R side P side Factory setting
PJ Interface Serial Parallel P side
* The parallel interface is selected by default.
CAUTION:
• The input buffer size is fixed to 4K bytes.
• Serial data length is fixed to 8 bits.
• Printing rate decreases with print tone.
• The preset jumper setting remains valid until the control board is powered up next time or is reset.