User`s manual

BD2-1220/1221 User’s Manual
4
2.3 Print Paper Specifications
Use the recommended thermal papers listed below:
TF50KS-E2D (normal paper) from Nippon Paper
F230AA (normal paper) from Mitsubishi Paper or equivalent
*Paper thickness depends on the thermal head models.
* If an unspecified thermal paper is used, print tone may vary from the standard print tone.
*To preserve printed information for extended time period, carefully control temperature, humidity,
and other storage conditions.
* For the details of usable thermal papers, refer to the Specifications for each thermal print head.
* While you can use up to 150µm of paper thickness on some print heads, it is limited to 80 µm if the
auto cutter (ACS-220/230 Series) is used.
2.4 Thermal Print Head and Peripheral Devices
The control board supports the following thermal print heads and peripheral devices:
(1)Thermal print head
80-mm paper: LT-1320/1321
58-mm paper: LT-1220/1221
(2)Auto cutter
ACS-230/220 Series Auto Cutter
(3)Paper Near End sensor (optional)
* For more detailed specifications for these devices, refer to each User’s Manual.